| 型号 : | RTM3000 | 类型 : | 数字示波器 |
| 通道数 : | 2 | 带宽 : | 200MH |
| 采样率 : | 5 GS/s 每通道 | 记录长度 : | 每通道 50M 样点 |
| 波形捕获率 : | 100 万波形 / 秒 | 重量 : | 2 |
| 加工定制 : | 否 |
產品特点
RTE1000示波器整合多领域测试方案包含时间，频率，协议和逻辑分析功能。从嵌入式设计开发到电力电子技术分析与排除问题，RTE1000让日常的测试与测量準确且容易。
Z大带宽：200MHz至 2GHz
Z大採样率：5 Gsample/s
Z大记忆深度：200 Msample
Z小RMS noise floor 80uV
Z高16 bits垂直分辨率
MSO：16个数字频道，可选，可改装
内建USB+LAN标準介面+GPIB(选购)
| Specifications | |||||||
| RTE1XX2 (2CH) | |||||||
| Item | RTE1022 | RTE1032 | RTE1052 | RTE1102 | RTE1152 | RTE1202 | |
| bandwidth (–3 dB) | 50 Ω | ≧200 MHz | ≧350 MHz | ≧500 MHz | ≧1 GHz | ≧1.5 GHz | ≧2 GHz |
1 MΩ | ≧200 MHz | ≧350 MHz | ≧500 MHz | ||||
| RTE1XX4 (4CH) | |||||||
| Item | RTE1024 | RTE1034 | RTE1054 | RTE1104 | RTE1154 | RTE1204 | |
| bandwidth (–3 dB) | 50 Ω | ≧ 200 MHz | ≧350 MHz | ≧500 MHz | ≧1 GHz | ≧1.5 GHz | ≧2 GHz |
1 MΩ | ≧200 MHz | ≧350 MHz | ≧500 MHz | ||||
| Vertical system | |||||||
| Vertical resolution | 8 bit , 16 bit (with high definition mode) | ||||||
| DC gain accuracy | ±1.5 % (input sensitivity > 5 mV/div)±2 % ...(input sensitivity ≦ 5 mV/div to ) | ||||||
| Input sensitivity | 50Ω input | 0.5 mV/div to 1 V/div | |||||
1 MΩ input | 0.5 mV/div to 10 V/div | ||||||
| Maximum input voltage | 50Ω input | 5 V (RMS), max. | |||||
1 MΩ input | 150 V (RMS), 200 V (Vp), derates at | ||||||
| Rise time/fall time | < 1.75 ns | < 1 ns | < 700 ps | < 350 ps | < 233 ps | < 175 ps | |
| Horizontal system | |||||||
| Timebase | range | 50 ps/div ~ 5000 s/div | |||||
accuracy | ±4 ppm (during calibration interval) | ||||||
| Trigger system | |||||||
| Trigger types | edge, glitch, width, runt, window, timeout, interval, slew | ||||||
| Analysis and measurement functions | |||||||
| Automatic measurements | 77 measurement functions | ||||||
| Cursor measurements | 2 cursor sets, each consisting of two horizontal and two vertical cursors | ||||||
| Waveform mathematics | 4 math waveforms; | ||||||
| MSO option | |||||||
| Digital channels | 16 (2 logic probes) | ||||||
| Input impedance | 100 k || 4 pF | ||||||
| Sampling rate | 5 Gsample/s per channel | ||||||
| Acquisition memory | 100 Msample per channel | ||||||
| Parallel buses | up to 4 | ||||||
| Menu languages | multiple languages | ||||||
| Interface | USB 2port, type A plug, version 3.0 | ||||||
| Choose additional probes | |||||||
| base unit | RTE-ZP10 500 MHz passive probe per channel | ||||||
| Single-ended passive probes | RT-ZP10 | 500 MHz, passive, 10:1, 1 MΩ || 9.5 pF, max. 400 V | |||||
| RT-ZH10 | 400 MHz, passive, high-voltage, 100:1, 50 MΩ || 7.5 pF, 1 kV (RMS) | ||||||
| RT-ZH11 | 400 MHz, passive, high-voltage, 1000:1, 50 MΩ || 7.5 pF, 1 kV (RMS) | ||||||
| Active broadband probes: single-ended | RT-ZS10E | 1.0 GHz, active, 1 MΩ || 0.8 pF | |||||
| RT-ZS10 | 1.0 GHz, active, 1 MΩ || 0.8 pF, R&S ProbeMeter, micro button | ||||||
| RT-ZS20 | 1.5 GHz, active, 1 MΩ || 0.8 pF, R&S ProbeMeter, micro button | ||||||
| RT-ZS30 | 3.0 GHz, active, 1 MΩ || 0.8 pF, R&S ProbeMeter, micro button | ||||||
| Active broadband probes: differential | RT-ZD10 | 1.0 GHz, active, differential, 1 MΩ || 0.6 pF, R&S ProbeMeter, micro button | |||||
| RT-ZD20 | 1.5 GHz, active, differential, 1 MΩ || 0.6 pF, R&S ProbeMeter, micro button | ||||||
| RT-ZD30 | 3.0 GHz, active, differential, 1 MΩ || 0.6 pF, R&S ProbeMeter, micro button | ||||||
| High voltage probes: differential | RT-ZD01 | 100 MHz, high-voltage, active, differential, 8 MΩ || 3.5 pF, 1 kV (RMS) (CAT III) | |||||
| Current probes | RT-ZC10 | 10 MHz, current, AC/DC, 0.01 V/A, 150 A (RMS) | |||||
| RT-ZC20 | 100 MHz, current, AC/DC, 0.1 V/A, 30 A (RMS) | ||||||
| RT-ZC30 | 120 MHz, AC/DC, 1 V/A, 5 A (RMS) | ||||||
| RT-ZC05B | 2 MHz, current, AC/DC, 0.01 V/A, 500 A (RMS), R&S probe interface | ||||||
| RT-ZC10B | 10 MHz, current, AC/DC, 0.01 V/A, 150 A (RMS), R&S probe interface | ||||||
| RT-ZC15B | 50 MHz, AC/DC, 0.1 V/A, 30 A (RMS), R&S probe interface | ||||||
| RT-ZC20B | 100 MHz, current, AC/DC, 0.1 V/A, 30 A (RMS), R&S probe interface | ||||||
| Multi-channel power probe | RT-ZVC02 | 2 × 2 voltage/current channels, for R&S RTO2000/R&S RTE | |||||
| RT-ZVC04 | 2 × 4 voltage/current channels, for R&S RTO2000/R&S RTE | ||||||
| Option | |||||||
| Hardware | RTE-B1 | Mixed signal option, 400 MHz, 5 Gsample/s, 16 channels, Memory 100 Msample/channel | |||||
| RTE-B1E | Digital extension port for R&S RT-ZVCxx usage with R&S RTE oscilloscope, included in R&S RTE-B1 | ||||||
| RTE-B6 | Arbitrary waveform generator, 100 MHz, 2 analog channels, 8-bit pattern generator | ||||||
| RTE-B10 | GPIB interface | ||||||
| Software | RTE-K1 | I2C/SPI serial triggering and decoding | |||||
| RTE-K2 | UART/RS-232/RS-422/RS-485 serial triggering and decoding | ||||||
| RTE-K3 | CAN/LIN serial triggering and decoding | ||||||
| RTE-K4 | FlexRay serial triggering and decoding | ||||||
| RTE-K5 | I2S serial triggering and decoding | ||||||
| RTE-K6 | MIL-STD-1553 serial triggering and decoding | ||||||
| RTE-K7 | ARINC 429 triggering and decoding | ||||||
| RTE-K8 | Ethernet serial decoding | ||||||
| RTE-K9 | CAN-FD serial triggering and decoding | ||||||
| RTE-K10 | SENT serial triggering and decoding | ||||||
| RTE-K50 | Manchester and NRZ serial triggering and decoding | ||||||
| RTE-K55 | MDIO serial triggering and decoding | ||||||
| RTE-K57 | IEEE 100base-T1 serial triggering and decoding | ||||||
| RTE-K60 | USB 1.0/1.1/2.0/HSIC serial triggering and decoding | ||||||
| RTE-K63 | USB power delivery serial triggering and decoding | ||||||
| RTE-K65 | SpaceWire serial triggering and decoding | ||||||
| RTE-K76 | CXPI serial triggering and decoding | ||||||
| Analysis | RTE-K18 | Spectrum analysis | |||||
| RTE-K31 | Power analysis | ||||||